Описание

  • Fully encapsulated
  • Integrated logic
  • Large working range
  • Recognition of high-gloss and jet black objects
These sensors have been specially designed for use in accumulation roller conveyors. Their compact design allows for installation between rollers below the transport level. They are thus protected against mechanical damage.
Range 6500 mm
Reference Reflector/Reflector Foil RQ100BA
Min. Distance to Reflector 100 mm
Switching Hysteresis < 15 %
Light Source Red Light
Polarization Filter yes
Service Life (T = +25 °C) 100000 h
Max. Ambient Light 10000 Lux
Opening Angle 5 °
Two-Lens Optic yes
Electrical Data
Supply Voltage 18...30 V DC
Current Consumption Sensor (Ub = 24 V) < 25 mA
Switching Frequency 100 Hz
Response Time 5 ms
Temperature Drift < 10 %
Temperature Range -15...50 °C
Number of Switching Outputs 1
Switching Output Voltage Drop < 0,8 V
PNP Switching Output/Switching Current 200 mA
Short Circuit Protection yes
Reverse Polarity Protection yes
Overload Protection yes
Logic yes
Block Forwarding yes
Valve Control yes
Protection Class III
Mechanical Data
Setting Method Potentiometer
Housing Material Plastic
Full Encapsulation yes
Degree of Protection IP65
Connection M12 ? 1, 4-pin
Cable Length 150 cm
Pneumatic Solenoid Valve Unit
Valve no. K04
Supply Voltage Valve 19,2...28,8 V
Current Consumption Valve 86 mA
Operating Pressure 4...7 bar
Nominal Width 0,8 mm
Nominal flow rate 1 -> 2 20 NL/min
Nominal flow rate 2 -> 3 100 NL/min
Supply-Line Connector Pipe 2? 8?1
Working-Line Connector Pipe 4?1
Valve function 3/2-Way
Switching function NC
Output
PNP NO yes
''